SI VIS PACEM, PARA BELLUM: L'X-37 è uno spazioplano sperimentale non pilotato sviluppato per la U.S. Space Force.

L'X-37 è uno spazioplano sperimentale non pilotato sviluppato per la U.S. Space Force. Una volta posizionato in orbita è in grado di volare ed atterrare autonomamente. Il programma vede la partecipazione sia della Forza Spaziale statunitense, che di DARPA e NASA. Boeing è il primo contraente per lo sviluppo del velivolo.

Storia del progetto

X-37

Il programma di dimostrazione tecnologica X-37, guidato dalla NASA, fu ideato per testare tecnologie chiave per il volo orbitale, nell'ambito della propulsione, della guida avanzata, della navigazione, dei sistemi di protezione termica, e dei nuovi materiali. Lo sviluppo doveva condurre alla realizzazione di un velivolo per operazioni orbitali prolungate fino a nove mesi, durante i quali poteva condurre missioni di riparazione o messa in orbita di satelliti, così come operazioni militari di interesse per l'aeronautica. Il design doveva servire da base per lo sviluppo di un nuovo spazioplano erede dello Space Shuttle, utilizzabile anche come modulo di salvataggio per la Stazione Spaziale Internazionale.

Originariamente ideato per essere lanciato dalla stiva dello Space Shuttle, in seguito al disastro del Columbia (avvenuto nel 2003), si decise che l'X-37 dovesse essere traghettato dal vettore Delta IV, soluzione più economica.

X-37B (Orbital Test Vehicle)

Il 17 novembre del 2006 l'Air Force statunitense annunciò lo sviluppo del X-37B (derivato dal precedente programma della NASA, da allora ridenominato X-37A), denominato Orbital Test Vehicle (OTV).

Il progetto OTV gode di un piano di investimenti dell'agenzia DARPA (Dipartimento della Difesa degli Stati Uniti), della NASA, della Space Force, oltre che della Boeing. Lo sforzo per la costruzione di questo spazioplano viene supportato dall'Air Force Rapid Capabilities Office, con una partnership della NASA e del Air Force Research Laboratory, mentre la Boeing è il principale appaltatore del programma.

L'X-37B rappresenterà per l'USSF la piattaforma privilegiata per condurre test orbitali con cui sviluppare nuove tecnologie per la difesa americana, con potenziali applicazioni nel campo della ricognizione e della sorveglianza.

Sviluppi futuri

Risulterebbe essere allo studio una versione ingrandita dello spazioplano in grado di portare un equipaggio nello spazio fino alla Stazione spaziale internazionale; questa versione è al momento nota come X-37C.

Impiego operativo

Il 22 aprile del 2010, alle ore 23:58 GMT, un veicolo ha effettuato, con successo, un primo volo in orbita bassa, denominato OTV-1, partendo dalla base dell'Air Force di Cape Canaveral, a bordo di un razzo Atlas V. Sette mesi dopo il lancio il veicolo è rientrato autonomamente alla base aerea di Vandenberg, California (con la base di Edwards indicata come sito alternativo).

Un secondo velivolo di questa serie, è stato lanciato il 5 marzo 2011 dalla Cape Canaveral Air Force Station in Florida, per la missione denominata OTV-2, ed è atterrato sempre alla base di Vandenberg il 16 giugno 2012, dopo 468 giorni nello spazio.

Un ulteriore lancio è stato effettuato l'11 dicembre 2012 sempre dalla Cape Canaveral Air Force Station in Florida, senza alcun preavviso, alloggiato nell'ogiva di un vettore Atlas V. Dopo aver raggiunto, il 27 marzo 2014, i 469 giorni di volo spaziale senza equipaggio superando la durata della precedente missione, questo volo, denominato OTV-3, effettuato dal primo dei due esemplari di veicolo, è atterrato il 17 ottobre 2014 alla Vandenberg Air Force Base, dopo 674 giorni in orbita. Anche in questo caso non sono stati resi noti dettagli sulla missione e sui test effettuati, ma è stato comunicato che in generale hanno riguardato sistemi avanzati di guida, navigazione e controllo, sistemi di protezione termica, avionica di bordo, componenti resistenti alle alte temperature, sistemi di isolamento riusabili, componenti elettromeccaniche leggere di controllo del volo, e procedure automatiche per il volo orbitale, la fase di rientro in atmosfera e di atterraggio.

La quarta missione, denominata OTV-4, è partita dalla Cape Canaveral Air Force Station il 20 maggio 2015. Come sempre i dettagli degli scopi del volo e della strumentazione a bordo non sono totalmente pubblici, come non è stato reso pubblico quale dei due esemplari è stato utilizzato. Uno dei piccoli satelliti dimostrativi a bordo è il LightSail, destinato a sperimentare l'utilizzo di una vela, di 32 metri quadrati, che viene spinta dal vento solare, per testare le tecnologie di apertura e posizionamento della vela, e di controllo della navigazione. È previsto anche il test di un nuovo modello di propulsione che sfrutta l'effetto Hall. La missione si è conclusa il 7 maggio 2017, dopo 718 giorni, con un atterraggio autonomo al NASA Shuttle Landing Facility di Cape Canaveral.

Il 7 settembre 2017 dalla piattaforma 39A è avvenuto il lancio della quinta missione (OTV-5) che ha impiegato per la prima volta un razzo vettore Falcon 9 della SpaceX al posto dell'Atlas V. Rientra sulla Terra il 27 ottobre 2019 al Kennedy Space Center Shuttle Landing Facility, dopo 780 giorni di orbita.

ENGLISH

The Boeing X-37, also known as the Orbital Test Vehicle (OTV), is a reusable robotic spacecraft. It is boosted into space by a launch vehicle, then re-enters Earth's atmosphere and lands as a spaceplane. The X-37 is operated by the United States Space Force for orbital spaceflight missions intended to demonstrate reusable space technologies. It is a 120-percent-scaled derivative of the earlier Boeing X-40. The X-37 began as a NASA project in 1999, before being transferred to the United States Department of Defense in 2004.

The X-37 first flew during a drop test in 2006; its first orbital mission was launched in April 2010 on an Atlas V rocket, and returned to Earth in December 2010. Subsequent flights gradually extended the mission duration, reaching 780 days in orbit for the fifth mission, the first to launch on a Falcon 9 rocket. The latest mission, the sixth, launched on an Atlas V on 17 May 2020.

Development

Origins

In 1999, NASA selected Boeing Integrated Defense Systems to design and develop an orbital vehicle, built by the California branch of Boeing's Phantom Works. Over a four-year period, a total of US$192 million was spent on the project, with NASA contributing $109 million, the U.S. Air Force $16 million, and Boeing $67 million. In late 2002, a new $301-million contract was awarded to Boeing as part of NASA's Space Launch Initiative framework.

The aerodynamic design of the X-37 was derived from the larger Space Shuttle orbiter, hence the X-37 has a similar lift-to-drag ratio, and a lower cross range at higher altitudes and Mach numbers compared to DARPA's Hypersonic Technology Vehicle. An early requirement for the spacecraft called for a total mission delta-v of 7,000 miles per hour (3.1 km/s) for orbital maneuvers. An early goal for the program was for the X-37 to rendezvous with satellites and perform repairs. The X-37 was originally designed to be carried into orbit in the cargo bay of the Space Shuttle, but underwent redesign for launch on a Delta IV or comparable rocket after it was determined that a shuttle flight would be uneconomical.

The X-37 was transferred from NASA to the Defense Advanced Research Projects Agency (DARPA) on 13 September 2004. Thereafter, the program became a classified project. DARPA promoted the X-37 as part of the independent space policy that the United States Department of Defense has pursued since the 1986 Challenger disaster.

Glide testing

The vehicle that was used as an atmospheric drop test glider had no propulsion system. Instead of an operational vehicle's payload bay doors, it had an enclosed and reinforced upper fuselage structure to allow it to be mated with a mothership. In September 2004, DARPA announced that for its initial atmospheric drop tests the X-37 would be launched from the Scaled Composites White Knight, a high-altitude research aircraft.

On 21 June 2005, the X-37A completed a captive-carry flight underneath the White Knight from Mojave Spaceport in Mojave, California. Through the second half of 2005, the X-37A underwent structural upgrades, including the reinforcement of its nose wheel supports. The X-37's public debut was scheduled for its first free flight on 10 March 2006, but was canceled due to an Arctic storm. The next flight attempt, on 15 March 2006, was canceled due to high winds.

On 24 March 2006, the X-37 flew again, but a datalink failure prevented a free flight, and the vehicle returned to the ground still attached to its White Knight carrier aircraft. On 7 April 2006, the X-37 made its first free glide flight. During landing, the vehicle overran the runway and sustained minor damage. Following the vehicle's extended downtime for repairs, the program moved from Mojave to Air Force Plant 42 (KPMD) in Palmdale, California, for the remainder of the flight test program. White Knight continued to be based at Mojave, though it was ferried to Plant 42 when test flights were scheduled. Five additional flights were performed, two of which resulted in X-37 releases with successful landings. These two free flights occurred on 18 August 2006 and 26 September 2006.

X-37B Orbital Test Vehicle

On 17 November 2006, the U.S. Air Force announced that it would develop its own variant from NASA's X-37A. The Air Force version was designated the X-37B Orbital Test Vehicle (OTV). The OTV program was built on earlier industry and government efforts by DARPA, NASA, and the Air Force under the leadership of the Air Force Rapid Capabilities Office in partnership with NASA and the Air Force Research Laboratory. Boeing was the prime contractor for the OTV program. The X-37B was designed to remain in orbit for up to 270 days at a time. The Secretary of the Air Force stated that the OTV program would focus on "risk reduction, experimentation, and operational concept development for reusable space vehicle technologies, in support of long-term developmental space objectives".

The X-37B was originally scheduled for launch in the payload bay of the Space Shuttle, but following the Space Shuttle Columbia disaster, it was transferred to a Delta II 7920. The X-37B was subsequently transferred to a shrouded configuration on the Atlas V rocket, following concerns over the unshrouded spacecraft's aerodynamic properties during launch. Following their missions, X-37B spacecraft primarily land on a runway at Vandenberg Air Force Base, California, with Edwards Air Force Base as a secondary site. In 2010, manufacturing work began on the second X-37B, OTV-2, which conducted its maiden launch in March 2011.

On 8 October 2014, NASA confirmed that X-37B vehicles would be housed at Kennedy Space Center in Orbiter Processing Facilities (OPF) 1 and 2, hangars previously occupied by the Space Shuttle. Boeing had said the space planes would use OPF-1 in January 2014, and the Air Force had previously said it was considering consolidating X-37B operations, housed at Vandenberg Air Force Base in California, nearer to their launch site at Cape Canaveral. NASA also stated that the program had completed tests to determine whether the X-37B, one-fourth the size of the Space Shuttle, could land on the former Shuttle runways. NASA furthermore stated that renovations of the two hangars would be completed by the end of 2014; the main doors of OPF-1 were marked with the message "Home of the X-37B" by this point.

Most of the activities of the X-37B project are secret. The official U.S. Air Force statement is that the project is "an experimental test program to demonstrate technologies for a reliable, reusable, uncrewed space test platform for the U.S. Air Force". The primary objectives of the X-37B are twofold: reusable spacecraft technology and operating experiments which can be returned to Earth. The Air Force states that this includes testing avionics, flight systems, guidance and navigation, thermal protection, insulation, propulsion, and re-entry systems.

Speculation regarding purpose

In May 2010, Tom Burghardt speculated on Space Daily that the X-37B could be used as a spy satellite or to deliver weapons from space. The Pentagon subsequently denied claims that the X-37B's test missions supported the development of space-based weapons.

In January 2012, allegations were made that the X-37B was being used to spy on China's Tiangong-1 space station module. Former U.S. Air Force orbital analyst Brian Weeden later refuted this claim, emphasizing that the different orbits of the two spacecraft precluded any practical surveillance flybys.

In October 2014, The Guardian reported the claims of security experts that the X-37B was being used "to test reconnaissance and spy sensors, particularly how they hold up against radiation and other hazards of orbit".

In November 2016, the International Business Times speculated that the U.S. government was testing a version of the EmDrive electromagnetic microwave thruster on the fourth flight of the X-37B. In 2009, an EmDrive technology transfer contract with Boeing was undertaken via a State Department TAA and a UK export license, approved by the UK Ministry of Defence. Boeing has since stated that it is no longer pursuing this area of research. The U.S. Air Force has stated that the X-37B is testing a Hall-effect thruster system for Aerojet Rocketdyne.

In July 2019, former United States Secretary of the Air Force Heather Wilson explained that when an X-37B was in an elliptic orbit it could at perigee use the thin atmosphere to make an orbit change preventing some observers from discovering the new orbit for a while, permitting secret activities.

Astronomer Jonathan McDowell, editor of Jonathan's Space Report, has stated that satellites launched from the X-37B were not reported, as required by the Registration Convention, to the United Nations Office for Outer Space Affairs so other parties to the convention would not know about them.

Processing

Processing for the X-37 is done inside Bays 1 and 2 of the Orbiter Processing Facility (OPF) at Kennedy Space Center in Florida, where the vehicle is loaded with its top-secret payload. The X-37 is then placed inside a fairing along with its stage adapter and transported to the launch site. Previous launch sites have included SLC-41 and Kennedy Space Center LC-39A.

Landing is done at one of three sites across the US: the Shuttle Landing Facility at Kennedy Space Center, Vandenberg Air Force Base, or Edwards Air Force Base. To return to Kennedy Space Center, the X-37 is placed into a payload canister and loaded into a Boeing C-17 cargo plane. Once at Kennedy, the X-37 is unloaded and towed to the OPF, where it is prepared for its next flight.

Design

The X-37 Orbital Test Vehicle is a reusable robotic spaceplane. It is an approximately 120-percent-scale derivative of the Boeing X-40, measuring over 29 feet (8.8 m) in length, and features two angled tail fins. The X-37 launches atop an Atlas V 501 or a SpaceX Falcon 9 rocket. The spaceplane is designed to operate in a speed range of up to Mach 25 on its reentry.

The technologies demonstrated in the X-37 include an improved thermal protection system, enhanced avionics, an autonomous guidance system and an advanced airframe. The spaceplane's thermal protection system is built upon previous generations of atmospheric reentry spacecraft, incorporating silica ceramic tiles. The X-37's avionics suite was used by Boeing to develop its CST-100 crewed spacecraft. The development of the X-37 was to "aid in the design and development of NASA's Orbital Space Plane, designed to provide a crew rescue and crew transport capability to and from the International Space Station", according to a NASA fact sheet.

The X-37 for NASA was to be powered by one Aerojet AR2-3 engine using storable propellants, providing thrust of 6,600 pounds-force (29.4 kN). The human-rated AR2-3 engine had been used on the dual-power NF-104A astronaut training vehicle and was given a new flight certification for use on the X-37 with hydrogen peroxide/JP-8 propellants. This was reportedly changed to a hypergolic nitrogen-tetroxide/hydrazine propulsion system.

The X-37 lands automatically upon returning from orbit and is the second reusable spacecraft to have such a capability, after the Soviet Buran shuttle. The X-37 is the smallest and lightest orbital spaceplane flown to date; it has a launch mass of around 11,000 pounds (5,000 kg) and is approximately one quarter of the size of the Space Shuttle orbiter.

On 13 April 2015, the Space Foundation awarded the X-37 team with the 2015 Space Achievement Award "for significantly advancing the state of the art for reusable spacecraft and on-orbit operations, with the design, development, test and orbital operation of the X-37B space flight vehicle over three missions totaling 1,367 days in space”.

Operational history

As of October 2019, the two operational X-37Bs have completed five orbital missions; they have spent a combined 2,865 days (7.85 years) in space.

OTV-1

The first X-37B launched on its first mission – OTV-1/USA-212 – on an Atlas V rocket from Cape Canaveral SLC-41 on 22 April 2010 at 23:52 UTC. The spacecraft was placed into low Earth orbit for testing. While the U.S. Air Force revealed few orbital details of the mission, a worldwide network of amateur astronomers claimed to have identified the spacecraft in orbit. On 22 May 2010, the spacecraft was in an inclination of 39.99°, circling the Earth once every 90 minutes on an orbit 249 by 262 miles (401 by 422 km). OTV-1 reputedly passed over the same given spot on Earth every four days, and operated at an altitude that is typical for military surveillance satellites. Such an orbit is also common among civilian LEO satellites, and the spaceplane's altitude was the same as that of the ISS and most other crewed spacecraft.

The U.S. Air Force announced a 3–6 December landing on 30 November 2010. As scheduled, the X-37B was de-orbited, reentered Earth's atmosphere, and landed successfully at Vandenberg AFB on 3 December 2010, at 09:16 UTC, conducting the first US autonomous orbital landing onto a runway. This was the first such landing since the Soviet Buran shuttle in 1988. In all, OTV-1 spent 224 days and 9 hours in space. OTV-1 suffered a tire blowout during landing and sustained minor damage to its underside.

OTV-2

The second X-37B launched on its inaugural mission, designated OTV-2/USA-226, aboard an Atlas V rocket from Cape Canaveral SLC-41 on 5 March 2011 at 22:46 UTC. The mission was classified and described by the U.S. military as an effort to test new space technologies. On 29 November 2011, the U.S. Air Force announced that it would extend USA-226 beyond the 270-day baseline duration. In April 2012, General William L. Shelton of the Air Force Space Command declared the ongoing mission a "spectacular success".

On 30 May 2012, the Air Force stated that the X-37B would land at Vandenberg AFB in June 2012. The spacecraft landed autonomously on 16 June 2012, having spent 468 days and 14 hours in space.

OTV-3

The third mission and second flight of the first X-37B, OTV-3 was originally scheduled to launch on 25 October 2012, but was postponed because of an engine issue with the Atlas V launch vehicle. It was successfully launched from Cape Canaveral SLC-41 on 11 December 2012 at 18:03 UTC. Once in orbit, the spacecraft was designated USA-240. Landing occurred at Vandenberg AFB on 17 October 2014 at 16:24 UTC, after a total time in orbit of 674 days and 22 hours.

OTV-4

The fourth X-37B mission, OTV-4, was codenamed AFSPC-5 and designated as USA-261 in orbit. It was the second flight of the second X-37B vehicle. The X-37B launched on an Atlas V rocket from Cape Canaveral SLC-41 on 20 May 2015 at 15:05 UTC. Objectives included a test of Aerojet Rocketdyne's XR-5A Hall-effect thruster in support of the Advanced Extremely High Frequency communications satellite program, and a NASA investigation on the performance of various materials in space for at least 200 days. The vehicle spent what was then a record-breaking 717 days and 20 hours in orbit before landing at Kennedy Space Center's Shuttle Landing Facility on 7 May 2017 at 11:47 UTC.

OTV-5

The fifth X-37B mission, designated USA-277 in orbit, was launched from Kennedy Space Center Launch Complex 39A on 7 September 2017 at 14:00 UTC, just before the arrival of Hurricane Irma. The launch vehicle was a Falcon 9 rocket, and a number of small satellites also shared the ride. The spacecraft was inserted at a higher inclination orbit than previous missions, further expanding the X-37B's envelope. During the flight, the spacecraft modified its orbit using an on-board propulsion system. While the complete payload for OTV-5 is classified, the Air Force announced that one experiment flying is the Advanced Structurally Embedded Thermal Spreader II (ASETS-II), which measures the performance of an oscillating heat pipe. The mission was completed with the vehicle landing at the Shuttle Landing Facility on 27 October 2019 at 07:51 UTC.

OTV-6 (USSF 7)

The sixth X-37B mission (OTV-6), U.S. Space Force 7 (formerly known as AFSPC 7), launched on an Atlas V 501 rocket from Cape Canaveral SLC-41 on 17 May 2020 at 13:14 UTC. The mission hosts more experiments than prior X-37B flights, including two NASA experiments. One is a sample plate evaluating the reaction of select materials to conditions in space. The second studies the effect of ambient space radiation on seeds. A third experiment designed by the Naval Research Laboratory (NRL) transforms solar power into radio frequency microwave energy, then studies transmitting that energy to Earth. The X-37B remains a Department of the Air Force asset, but the newly established U.S. Space Force is responsible for the launch, on-orbit operations, and landing.

The X-37B released a small, 300 pounds (136 kg) satellite named FalconSAT-8 (USA-300) around 28 May 2020. Developed by United States Air Force Academy cadets in partnership with the Air Force Research Laboratory (AFRL), the small satellite carries five experimental payloads. The spacecraft will test a novel electromagnetic propulsion system, low-weight antenna technology and a commercial reaction wheel to provide attitude control in orbit. According to the United States Air Force Academy, FalconSAT-8's experiments include:

Magnetogradient Electrostatic Plasma Thruster (MEP) – Novel electromagnetic propulsion system

Metamaterials Antenna (MMA) – Low size, weight, power antenna with phased-array like performance

Carbon nanotube experiment (CANOE) – RF cabling with carbon nanotube braiding flexed using shape-memory alloy

Attitude Control and Energy Storage (ACES) – Commercial reaction wheel modified into a flywheel for energy storage and release

SkyPad – Off-the-shelf cameras and GPUs integrated into low-SWAP (size, weight and power) package.

Variants

X-37A

The X-37A Approach and Landing Test Vehicle (ALTV) was an initial NASA version of the spacecraft used in drop glide tests in 2005 and 2006.[12][91]

X-37B

The X-37B is a modified version of the NASA X-37A, built for the U.S. Air Force. Two were built and have been used for multiple orbital missions.

X-37C

In 2011, Boeing announced plans for a scaled-up variant of the X-37B, referring to it as the X-37C. The X-37C spacecraft would be between 165% and 180% of the size of the X-37B, allowing it to transport up to six astronauts inside a pressurized compartment housed in the cargo bay. Its proposed launch vehicle was the Atlas V. In this role, Boeing's X-37C could potentially compete with the corporation's CST-100 Starliner commercial space capsule.

Specifications

X-37B

General characteristics: